Automotive Welding Ireland
Vehicle welding done the proper way: correct-gauge steel, full-penetration MIG welds, dressed back, sealed and coated before the vehicle leaves.
In short
- We weld cars, 4x4s, pickups, vans, commercials, trailers and plant — anything with a steel chassis or underbody.
- Work covers corrosion repair, structural sections, mounts and brackets, and one-off fabrication.
- Every welded area is sealed, primed, painted and coated so bare steel is never left exposed.
- Send WhatsApp photos of the underside to 087 919 2193 and we'll tell you honestly what the vehicle needs before you travel to the yard.
What we weld
- Chassis rails, outriggers and crossmembers
- Sills, floor pans and inner structure
- Suspension, subframe and spring hanger mounts
- Tow points, brackets and mounting plates
- Trailer drawbars, frames and ramp hinges
- Plant and machinery steelwork
How we work
Everything starts on the ramp with photos so you can see exactly what we are looking at. Corroded or damaged steel is cut back to sound metal, replacement sections are fabricated to match the original profile, and the repair is MIG welded for full penetration.
The finish matters as much as the weld. Welds are dressed, seams sealed, then primed, painted and coated so the repair is protected from the first wet day.
Every repair, step by step
- Ramp inspection with photos of every affected area
- Corroded steel cut back to clean, solid metal
- Repair sections fabricated in correct-gauge steel
- MIG welded for full penetration and dressed back
- Seams sealed so water cannot enter the joint
- Primed and painted before coating
- Underbody protection applied over the repair
- Photos of the finished work before collection
Real welding & rust repair work
Every photo is real work carried out at Rayco — no stock images.
Frequently asked questions
What types of vehicle do you weld?
Cars, 4x4s, pickups, vans, commercials, campervans, trailers, horseboxes and plant machinery.
Do you do mobile welding?
Welding is carried out at the yard, where the vehicle can go on the ramp and the repair can be sealed and coated properly afterwards.
Can you fabricate a section that isn't available as a part?
Yes — most chassis and underbody repair sections are fabricated in-house from correct-gauge steel to match the original profile.
How do I get a price?
WhatsApp clear photos of the area to 087 919 2193 with the vehicle year, make and model.
Related chassis & welding services
Get a welding quote today
WhatsApp photos of the rust or damage — or the NCT fail sheet — and we'll come back with an honest price before you travel.