Plant Machinery Welding Ireland
Machinery steel takes abuse and lives outdoors. We repair corroded and cracked structure, then coat it so it survives the next season.
In short
- Plant welding covers frames, brackets, guards, steps, panels and corroded structural steel.
- Machinery that lives outdoors and works in mud corrodes fast where coatings have been knocked off.
- Repairs are welded, cleaned back, painted and coated for outdoor service.
- Call 087 919 2193 with details of the machine and the damage.
Where machinery steel fails
Damage on plant is usually a mix of wear and corrosion: coatings knocked off by stone and steel, then rust taking hold at the bare patch. Vibration and load then find the weakened area.
Guards, steps, brackets and panel mounts take the most punishment because they are exposed and thin relative to the main frame.
Plant work we take on
- Frame and chassis steel repair
- Brackets, mounts and pin bosses' surrounding steel
- Guards, covers and step assemblies
- Panel and body steel repair
- Corroded structure cut out and rebuilt
- Protective coating after repair
Tell us the machine before you travel
Size and access matter with plant. Send the make, model and photos before arranging anything so we can confirm we can take it and what the repair involves.
Every repair, step by step
- Ramp inspection with photos of every corroded area
- Corroded steel cut back to clean, solid metal
- Repair sections fabricated in correct-gauge steel
- MIG welded for full penetration and dressed back
- Seams sealed so water cannot enter the joint
- Primed and painted before coating
- Underbody protection applied over the repair
- Photos of the finished work before collection
Real welding & rust repair work
Every photo is real work carried out at Rayco — no stock images.
Frequently asked questions
What plant machinery do you work on?
Send the machine type, size and photos — we'll confirm what we can take and what the repair involves before you travel.
Do you repair corrosion as well as cracks?
Yes — corroded structure is cut out and rebuilt, and the area is coated afterwards.
Can you paint and protect after welding?
Yes, repairs are cleaned back, painted and coated so they stand up to outdoor use.
Do you do on-site machinery welding?
Work is carried out in the yard, where access, cleaning and finishing can be done properly.
How do I get a quote?
Call 087 919 2193 or WhatsApp photos of the damaged area plus the machine details.
Get a welding quote today
WhatsApp photos of the rust or damage — or the NCT fail sheet — and we'll come back with an honest price before you travel.